| All
the roof mounting options in the Dimplex range are simple
and effective. |
|
|
| •
Can be used in all the wind and snow loading zones specified
in the new DIN 1055. |
| •
Faster and simpler to mount than the K3 system which was
already appreciated for its ease of installation. |
| •
Includes 0.8m push fit flexible hoses for rapid installation. |
| •
Protrudes less than 200mm from the roof. |
| |
| Integrated |
| •
Sleek profile, mounted flush with roof. |
| • Forms a weather proof, integral part of the roof
structure. |
| • Available for slate or tiles. |
| •
Rapid installation with its unique back plate mounting enabling
tiling to be completed before installing the collector. |
| |
|
| Integrated
with flashing kit |
|
| •
For integrated collectors, an additional box that hides
the pipes going into the roof and covers the gap between panels is available |
| |
| Free-standing |
|
|
| •
Either landscape or portrait orientation. |
| • Suitable for flat ground or flat roofs. |
| •
Panels can be mounted at 20° to 90°. |
| •
Extra bracing available for areas where extreme wind and
snow loadings is a concern. |
| |
| On
roof mounting system |
|
| |
| The
on roof system uses 4 brackets fixed to the girders of the
roof. A mounting bar is attached to the brackets making
it easy to fix the collectors on the roof. |
|
| |
| •
Allows rapid installation with minimal adjustments to the
existing roof. |
| • Flexible mounting system adaptable to the positioning
of girders. |
| •
Can be mounted landscape or portrait. |
| •
Collector angle is the same as the roof. |
| |
| |
|
| Roof
hooks |
|
| There
are 3 types of roof hook available, each for a different
roof type. They are attached to the girder which supports
the collector’s weight. The hooks are designed to
be used with minimal adjustments to the tiles. Weather proofing
is achieved by the tile over laying the roof hook. |
|
| |
|
| The
plain tile hook, corrugated tile hook and slate hook each
have a different profile for use with different tile thicknesses
and profiles. The use of the correct hook is important to
keep the collector close to the roof. |
|
| |
|
| Coach
bolts |
|
Coach
bolts are fixed straight through the roof into the girder
below. The hole is sealed with rubber washers to prevent
water ingress. The use of coach bolts gives a quick and
neat installation, ideal for use with sheet metal roofs. |
|
