Dimplex Under-Tile Heating

Product Dimensions
	Output (kw)	Area	Width mm	Length mm	Element Depth mm
DTW1M	0.16kw	1.0m²	500	2000	3
DTW1.5M	0.195kw	1.5m²	500	3000	3
DTW2M	0.26kw	2.0m²	500	4000	3
DTW3M	0.39kw	3.0m²	500	6000	3
DTW4M	0.52kw	4.0m²	500	8000	3
DTW5M	0.65kw	5.0m²	500	10000	3
DTW6	0.78kw	6.0m²	500	12000	3
Note: Each mat comes with adhesive roll and instruction for installation


Controller Dimensions
	Electrical Rating	Accuracy	Width mm	Height mm	Depth mm	Total Depth mm
DTW16S	15A	0.5°C	79	83	22	44
Note: Always use a standard electrical junction box when connecting more than two mats

Sizing Guide
Floor Width	Floor Length
		1m	1.5m	2m	3m	4m	5m
	1m	1 x DTW1M	1 x DTW1.5M	1 x DTW2M	1 x DTW3M	1 x DTW4M	1 x DTW5M
	1.5m	1 x DTW1.5M	1 x DTW2M	1 x DTW3M	1 x DTW4M	1 x DTW6M	1 x DTW6M+1 x DTW1.5M
	2m	1 x DTW2M	1 x DTW3M	1 x DTW4M	1 x DTW6M	2 x DTW4M	2 x DTW5M
	3m	1 x DTW3M	1 x DTW4M	1 x DTW6M	3 x DTW3M	2 x DTW6M	3 x DTW5M
	4m	1 x DTW4M	1 x DTW5M	2 x DTW4M	2 x DTW6M	4 x DTW4M	4 x DTW5M
	5m	1 x DTW5M	1 x DTW6M + 1 x DTW1.5M	2 x DTW5M	3 x DTW5M	4 x DTW5M	5 x DTW5M
Note: Always choose heater packs that are slightly smaller than your requirement as only tthe mesh can be cut (Not the wire!). This chart is for illustrative purposes only. Do not place under-tile heating under permanent fixtures (e.g. baths, kitchen cupboards)

Construction

Twin Core 160W/m2 cable
Fully screened for use in bathrooms or other wet areas
Two layers of insulation for maximum cable life
Easy to cut mesh backing that can be removed for small and awkward areas

Electrical

All installations should be carried out by a qualified electrician in accordance with the current wiring regulations
All installations require an RCD (residual current device) for safe operation
The Dimplex thermostatic controller has maximum load of 15A
Connecting more than two mats to a controller requires the use of a standard electrical junction box
The Dimplex thermostatic controller comes complete with a floor sensing probe

Installation Guidelines

The Dimplex under-tile heater can be fitted to :

Timber Suspended floors
Concerete solid floors
Dimplex strongly recommends the use of 10mm insulating tile backer board to maximise system performance

Design Freedom

By being concealed under the tiled floor, under-tile heating frees you to plan rooms and arrange furniture as you want, allowing a great deal of flexibility

Safety and Practicality

A warm tiled floor helps spills to dry quickly, avoiding slip-ups in bathrooms and kitchens, promoting a safer environment for all the family

Flexible Control

Because Dimplex under-tile heating is controlled independently of the main heating system, it offers maximum flexibility. Seperate settings can be programmed whether you are in, out, or even on holday, and the early start function always ensures the floor has reached your chosen temperature when you want it